Quantitative Magneto-Optical Imaging of Supercurrents in Heavy-Ion Irradiated Cuprate and Pnictide Superconductors

Spatial distributions of magnetic field and of current density in superconductors are obtained, in real-time, by the magneto-optical imaging technique with an indicator film. Quantitative values of the local magnetic field and then of the local current density were achieved by a careful optical calibration and custom algorithms for the inversion of Biot–Savart law. An iterative procedure was developed for the correction of artifacts due to the coupling of the indicator film magnetization with the in-plane magnetic field generated by the superconducting sample. This technique is highly valuable when the sample under study has nonuniform properties. Several cases of such systems are shown. Particular attention is devoted to the local variation of structural and chemical properties by means of heavy-ion irradiation. A comparative study of swift-ion irradiation effects between cuprate and pnictide superconductors is addressed. For the case of cuprate materials, some successful applications of the heavy ion irradiation engineering are presented and discussed.     

The effect of initial parameters on particle size distribution inverted using the laser diffraction technique and a non-linear iterative method

The Twomey non-linear iteration (NLI) method is known by the simple algorithm. However, the performance of the inversion is strongly depended on parameters of the NLI algorithm. Major parameters in the algorithm are the initial size distribution, weight parameter, and the number of iteration. In the study, we show how values of initial parameters affect to the result of size distribution in the algorithm by the laser diffraction scattering method. Computer simulations and experimental method are carried out to observe the influence of the parameters in the algorithm. Scattering pattern is calculated by Mie scattering model in the range of 5.0 × 10^?4 ? 2.5 rad. Experimental results were measured mono-distribution polystyrene latex (50 μm) and poly-distribution glass beads (3–30 μm, and 10–100 μm). The number of iteration is a most influence parameter in the NLI algorithm. If the number of iteration is too high for calculation, calculated result will lose the smoothness. We also introduced a new parameter C (combination of the sum of residual squares of scattering signals and sum of secondary differentiation of size distribution) to monitor the suitable stop criterion for the NLI method. The parameter C is a useful index for the poly dispersion sample to find the suitable stop criterion.     

A novel sphingophosphonolipid head group 1-hydroxy-2-aminoethyl phosphonate in Bdellovibrio stolpii

Members of the bacterial genus Bdellovibrio include strains that are free-living whereas others are known to invade and parasitize larger Gram-negative bacteria. The bacterium can synthesize several sphingophospholipid compounds including those with phosphoryl bonds as well as phosphonyl bonds. In the present study, the dominant sphingophosphonolipid component was isolated by column chromatography, and the long-chain bases, fatty acids, and polar head groups were identified by thin-layer and gas-liquid chromatographic procedures. The definitive structural identity of the sphingolipid was established by nuclear magnetic resonance and mass spectrometry of hydrolysis products and the intact compound. The compound was identified as N-2′-hydroxypentadecanoyl-2-amino-3,4-dihydroxyheptadecan-1-phosphono-(1-hydroxy-2-aminoethane).     

Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

东京中心城区的规划历程及其现状——探索迈向成熟都市的阶梯

在梳理东京都城市中心的形成以及城市规划史的基础上,通过选取两大重要的中心街区(丸之内办公街区、银座商业街区)作为案例,进一步剖析近代东京中心城区的形成,以及此后逐步迈向地域主导的规划方式的过程。其中特别着重考察在中心城区形成、发展、更新的过程中将承载了各个历史阶段记忆的街区特征(基因)传承下来并延续到未来的探索和努力。     

Textile‐surface interfacial asymmetric polymerization

This research demonstrated that polymerization of aniline on cellulose produces chiroptically active composites. Polymerization of aniline in the presence of cotton fibers consisting of chiral cellulose are performed to prepare a polyaniline (PANI)/cotton composite. The polymerization is conducted at the cotton interface. The resultant PANI/cotton composite shows chiroptical activity elucidated with diffuse reflectance circular dichroism. In this reaction, textile‐surface interfacial asymmetric polymerization is performed with imprinting of chiral structure from the cotton as a natural chiroptically active polymer to the PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41118.     

Long terminal linear alkyl group as internal crystallization accelerating moiety of poly(l-lactide)

Poly(l-lactide) (PLLA) polymers having terminal n-alkyl groups with a wide variety of lengths (C₀–C₂₂) were synthesized by ring-opening polymerization of l-lactide in the presence of coinitiators of l-lactic acid (C₀), 1-hexanol (C₆), 1-dodecanol (C₁₂), and 1-docosanol (C₂₂) and their segmental mobility and non-isothermal and isothermal crystallization behavior were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffractometry (WAXD). Glass transition and cold crystallization temperatures of melt-quenched samples during heating decreased with an increase in the length of terminal n-alkyl groups. The enhanced PLLA segmental mobility and hydrophobic interaction-based accelerated PLLA nucleation by the presence of terminal long n-alkyl groups should have caused the accelerated non-isothermal and isothermal crystallization of PLLA segments traced by cold crystallization temperature during heating and by radial growth rate of spherulites, respectively. The crystallization accelerating effect became higher with the length of terminal n-alkyl groups. The effects of the length of terminal n-alkyl group on the crystalline growth mechanism of PLLA at the lowest crystallizable temperature was insignificant, whereas the effects of the length of terminal n-alkyl group on the nucleation mechanism of PLLA chains were significant and insignificant for PLLA having M_n of 6–7 × 10³ of 2 × 10⁴ g mol⁻¹, respectively. WAXD measurements revealed that the transition crystallization temperature at which crystalline modification changes from δ-form to α-form was affected by the length of terminal n-alkyl group for PLLA having M_n of 6–7 × 10³ g mol⁻¹, but was not altered by the length of terminal n-alkyl group for PLLA having M_n of 2 × 10⁴ g mol⁻¹.     

Comparison of separation performance between single and two inlets hydrocyclones

Experimental studies have been carried out about the particle separation performance of single and two inlets hydrocyclones. Two types of hydrocyclones having the same total inlet holes area were examined. Hydrocyclone A (with single inlet hole) and hydrocyclone B (with two inlet holes) were used. An aqueous slurry of silica particles (0.5 wt% with a median diameter of about 2.1 μm) was tested using a 20 mm-diameter hydrocyclone with a 15% underflow ratio. It was found that the optimum flow rate which gives the highest separation performance of the hydrocyclone B is the same flow rate for each inlet. Usage of the hydrocyclone B indicated smaller cut size and higher particle collection efficiency compared to that of the hydrocyclone A, under the same flow rate or same pressure drop conditions. The time of flight model was used to predict the 50% cut size diameter for single inlet hydrocyclone, and the model was modified to the two inlets hydrocyclone. It was found that the calculated results agree well with the experimental results for the hydrocyclone A, and for the hydrocyclone B under the low total flow rates conditions.